LOW VOLTAGE · SECURITY

Alarm system installation for family homes

A family home alarm system is typically an 8–16 zone control panel, 6–10 detectors, siren, keypad and a GSM/IP communicator. Labour costs HUF 150,000–300,000, material HUF 250,000–700,000, with 0% VAT for private customers. We design, install and commission it in Buda and its suburbs – in new builds and existing houses.

What does an alarm system include?

An alarm is not a box but a system. Every part connects to the control panel, which sits in the low-voltage cabinet or the plant room.

  • Control panel – the brain of the system, with its own battery. The number of zones (typically 8–16) is how many detectors or detector groups it handles separately.
  • Motion detector (PIR) – in rooms on the typical intruder route: living room, hall, stairs, corridor.
  • Door/window contact – on doors, windows and the garage door. It reports on opening, before anyone gets in.
  • Glass-break detector – for large glazing and patio doors.
  • Smoke detector – linked to the alarm, it also alerts you to fire, even when the system is not armed.
  • Siren – indoor and outdoor, the outdoor one with a strobe.
  • Keypad – at the entrance; arms and disarms with a code, card or key fob.
  • GSM/IP communicator – forwards the alarm to your phone or to a monitoring centre.

Wired or wireless alarm?

For a new build or renovation we recommend a wired alarm: detectors get power and signal by cable, there are no batteries to change, and radio jamming does not affect it. A wireless alarm fits where no cable can be run later, or where you want to avoid chiselling.

CriterionWired alarmWireless alarm
Detector powerfrom the panel, by cablebattery
Maintenanceno battery changesbattery change every few years, depending on the detector
Radio jammingnot affectedgood systems report it, but it is possible in principle
Installationneeds cabling, in the wall during constructionfast, no chiselling
Best fornew build, renovation, long-termexisting finished home, rented property

The two can be combined: with a radio expander a wired panel also takes wireless detectors, for example in an outbuilding. In a new build, run the alarm cables before plastering.

Ajax wireless alarm control panel
A wireless alarm control panel (Ajax). · Image: Ajax Systems

How much does alarm installation cost in 2026?

SystemTypical scope for a family homeLabourMaterial (estimate)
Alarm system8–16 zones, 6–10 detectors, siren, keypad, GSM/IP communicatorHUF 150,000–300,000HUF 250,000–700,000

The price depends mainly on the number and type of detectors, cable length, and whether the cable can go into the wall during construction or has to be run later – and on whether you choose a wired or wireless system. Private customers pay 0% VAT, as our company is VAT-exempt. We quote item by item after a site survey.

The 230 V supply of the panel is connected by an electrician according to MSZ HD 60364, and we hand the system over with a test report.

Monitoring service or alerts to your phone?

There are two options, and they can work together.

  • Your own alerts – on alarm the communicator sends a push notification, SMS or call to your phone; you arm and disarm from the app. The only monthly cost is at most the data connection or SIM card.
  • Monitoring service – the signal goes to a 24/7 monitoring centre that verifies it, calls you and dispatches a patrol if needed. This is a monthly service; the fee is set by the monitoring company.

We configure the system so that monitoring can be added later, even if you only want phone alerts now.

Paradox, DSC, Satel or Ajax?

For wired alarms we mainly use Paradox, DSC and Satel panels; for wireless systems we install Ajax on request. All of them have a phone app and can connect to a monitoring centre. We also install, extend and take over existing Paradox or DSC alarm systems.

Can the alarm be linked to CCTV and KNX?

Yes, and it is worth it. On alarm the camera system highlights the footage of that zone, and the picture appears on your phone. In a KNX smart home arming can switch off major loads and lower the blinds, and an alarm turns on the lights. Alarm, cameras and network terminate in one low-voltage cabinet, on a UPS.

How is an alarm system installed?

  1. SurveyWe walk the house: doors and windows, rooms, likely intrusion routes, panel and keypad location, pets.
  2. Plan and quoteZone layout, position and type per detector, cable routes; an itemised quote.
  3. CablingA cable from every detector to the panel – in the wall during construction, concealed in existing houses; not needed for wireless systems.
  4. Mounting and commissioningPanel, detectors, sirens, keypad, communicator; zones, delays, user codes, notifications.
  5. HandoverEvery detector tested, phone app setup, a walkthrough, test report and documentation.

Frequently asked questions

How much does a home alarm system cost?

An 8–16 zone system with 6–10 detectors typically costs HUF 150,000–300,000 in labour and HUF 250,000–700,000 in material, depending on the number and type of detectors. Private customers pay 0% VAT, as our company is VAT-exempt.

Should I choose a wired or Wi-Fi alarm?

Wired wherever a cable can be run: no battery changes and no radio jamming. A wireless (Wi-Fi or radio) alarm is a good choice in a finished home, as it installs quickly without chiselling.

Do I need a monitoring service?

It is not mandatory. The alarm can send alerts to your phone. Monitoring adds value if you cannot always respond and want someone to verify the alarm and go on site if needed. It can be added later.

Does the alarm work during a power cut?

Yes. The panel has its own battery and keeps running on it during a power cut, and the communicator reports the mains failure. Runtime depends on battery capacity and load; we size it during design.

Can an alarm be retrofitted in an existing house?

Yes. We route the cable concealed, through the attic or in trunking; where that is not possible, wireless detectors join the system.

Are there pet-friendly motion detectors?

Yes. A pet-immune PIR detector ignores dogs and cats up to the body weight specified by the manufacturer. During the survey we check where your pet moves and position the detectors accordingly.

Let’s talk about your project.

Tell us what you are planning and we will get back to you within a few days.

Get in touch

Cookie settings

Choose what you consent to. We remember your choice for 6 months; change it any time via “Cookie settings” in the footer.

Privacy notice