Smart home installation by an electrician: Shelly, Home Assistant and KNX
We build smart home systems from survey to hand-over: design, device list, installation, programming and commissioning. We install Shelly and Sonoff relays behind switches and for blinds, Aqara and Zigbee sensors, a Home Assistant hub, smart thermostats, gate and garage control in houses and flats, and wired KNX systems in new builds – as an official KNX Partner. We are also an installation partner of MarketCom Kft., a Hungarian wholesale distributor of leading smart home brands.
Which smart home devices do we install?
Why should an electrician install Shelly and Sonoff?
The relay behind a switch is wired to 230 V. Most models need a neutral wire in the box, a deep enough back box and cable and protection that match the load. We check boxes and circuits during the survey, wire to standard and adapt the installation where needed — including DIN-rail devices in the distribution board.
Smart home after the wiring is done: hybrid KNX, Shelly and Home Assistant
Often the electrical installation is already finished and the house is still under construction when the smart home decision is made. We start by surveying the existing installation: distribution board, circuits, switch and light points, boxes and conduits. This shows what can be wired and what should be wireless.
- Where a bus cable can still be pulled (e.g. into an empty conduit before plastering), KNX devices can go on the wall and in the distribution board.
- Where there is no bus cable, Shelly relays, dimmers or blind controllers can go into the existing 230 V switch boxes; most models need a neutral wire in the box.
- One interface: Home Assistant brings KNX (via its KNX integration) and Shelly devices into one app for lighting, shading and heating, running locally.
How is a smart home system built?
- 1Survey
What you want to control and what is in the wall: neutral wire, box depth, circuits, conduits, Wi-Fi coverage.
- 2Design
Room-by-room function list, device layout and, where needed, the distribution board and network; a bus plan for KNX.
- 3Device list and quote
An itemised device list with makes and models; materials and labour on separate lines.
- 4Installation
An electrician wires relays, dimmers, actuators and meters in the boxes or the distribution board.
- 5Programming
Scenes, schedules and automations; ETS for KNX, Home Assistant on request to bring all brands into one interface.
- 6Commissioning
Testing and fine-tuning room by room.
- 7Hand-over
We show you the controls and document which device is where and what it switches; for KNX we hand over the ETS project file.
MarketCom installation partner
MarketCom Kft. is a Budapest-based wholesale distributor of leading smart home and smart electrical brands, including Shelly, Sonoff, Aqara, Home Assistant-compatible devices and Legrand. As their installation partner we install the devices they supply: they provide the products and technical background, we provide professional wiring, setup and hand-over.
Frequently asked questions
Can Shelly be installed in an existing house without chasing walls?
Usually yes: the relay goes into the existing switch box. Most models need a neutral wire in the box; we check this during the survey and propose a solution if it is missing.
Do I need Home Assistant?
No: Shelly, Sonoff and Aqara work with their own apps. Home Assistant is a good choice if you want several brands in one local interface without the cloud.
Do you install devices I bought myself?
Yes, we install and set them up. If you have not bought anything yet, we put together the list from the MarketCom range.
Does it work without the internet?
The switches always work manually. With Home Assistant and devices that support local control, automations run without the internet; remote access through a vendor cloud needs the internet.
How much does a smart home installation cost?
Every house is different: the price depends on the number of circuits, blinds and heating zones, the chosen system and the existing installation. Indicative ranges are on the KNX smart home page; the final price follows a site survey and an itemised quote, with devices and labour on separate lines. Market price ranges by system: What does a smart home cost in 2026?
Can a smart home be added after the wiring is finished?
Yes. After surveying the installation we propose what can be wired (where a bus cable can still be pulled) and what can be done with Shelly or Zigbee devices in the existing boxes; Home Assistant brings both into one interface.
KNX or Shelly and Home Assistant?
In a new build or full renovation wired KNX is the more durable, vendor-independent choice; in an existing house Shelly and Home Assistant do a lot without chasing walls. A hybrid is also possible.
Who programs and extends the system later?
We do the setup and programming and also take on later extensions and changes. For KNX we hand over the ETS project file, so the system is not tied to us.
Where do you work?
Budapest (mainly the Buda districts) and the Buda agglomeration.
Let’s talk about your project.
Tell us what you are planning and we will get back to you within a few days.
Get in touch