What does a smart home cost in Hungary in 2026?
According to public 2026 price lists, a smart home for a 100–150 m² family house in Hungary ranges from about HUF 850 thousand (retrofitted wireless control of lighting and blinds) to over HUF 7 million (wired KNX in a new house). The figure for a specific house depends on the number of functions, the chosen system and whether it is a new build or a retrofit. That is why we do not quote a fixed price on the phone: every house is different and needs an on-site survey and an itemised quote. Below we have collected what others publish and what drives the cost.
In short
- Wireless retrofit (Shelly/Zigbee, lighting + blinds): HUF 850–930 thousand according to mete.hu; FIBARO (Z-Wave) for a whole home HUF 1.87–2.04 million; Home Assistant hybrid HUF 1.43–1.56 million (incl. VAT, 120–150 m²).
- Wired system in a new house: Grenton HUF 3.3–3.6 million, Loxone HUF 4.12–4.5 million, KNX HUF 6.6–7.2 million (mete.hu, incl. VAT, 120–150 m²).
- Packages (budasmart.hu, 100–150 m², new build): basic HUF 1.5–3 million, comfort 3–6 million, premium 6–15+ million.
- Per square metre: a mid-range KNX system HUF 8,000–28,000/m² (daibau.hu, 2026).
- With us: an itemised quote after a function list and a system design. KNX is our main system; we are an official KNX Partner (123558).
Author: Norbert Madarász
, Managing Director and Partner · Updated: 14 November 2026
Smart home cost by system (2026)
The most detailed public price table is the one from mete.hu: devices, programming and the related electrical work included, for a 120–150 m² family house, incl. VAT.
| System, work | Indicative price (incl. VAT) | Typical case |
|---|---|---|
| Wireless retrofit (Shelly / Zigbee), lighting + blinds | HUF 850,000–930,000 | occupied house, no wall opening |
| Home Assistant hybrid system | HUF 1,430,000–1,560,000 | wireless and wired devices on one interface |
| Z-Wave retrofit (FIBARO), whole home | HUF 1,870,000–2,040,000 | occupied house, no wall opening |
| Grenton wired, new house | HUF 3,300,000–3,600,000 | new build, full renovation |
| Loxone wired, new house | HUF 4,120,000–4,500,000 | new build, full renovation |
| KNX, new house | HUF 6,600,000–7,200,000 | new build, full renovation |
| Smart heating control | HUF 115,000–130,000 per room | room-by-room control |
| System design and consulting | HUF 180,000–200,000 | mete.hu credits it on order |
Source: mete.hu, “Okosotthon-kiépítés árak 2026”, updated 23 October 2026. The ranges are indicative, not offers; the source itself stresses that the exact price follows the survey and the system design.
Packages and price per square metre
Other sources give ranges by functional level or floor area rather than by system:
| Source (date) | Scope | Published price |
|---|---|---|
| budasmart.hu (10 Aug 2026) | basic: lighting, shading, 2–3 heating zones | HUF 1.5–3 million |
| budasmart.hu (10 Aug 2026) | comfort: full heating/cooling zones, multiroom audio, security subsystem, gate, weather-based shading | HUF 3–6 million |
| budasmart.hu (10 Aug 2026) | premium: full automation, energy management, complex AV, access control, pool, irrigation | HUF 6–15+ million |
| daibau.hu (2026) | family house: lighting, shading, air conditioning, alarm and their control | approx. HUF 2.5–4.2 million |
| daibau.hu (2026) | mid-range KNX system for the whole house, with programming and visualisation | HUF 8,000–28,000/m² |
| okosotthonszerelod.hu (2026) | wired (KNX or Loxone), 100–150 m², lighting, shading, heating | HUF 2.5–7 million |
| okosotthonszerelod.hu (2026) | programming (ETS or vendor software), training, documentation | HUF 600,000–1,500,000 |
| okosotthonszerelod.hu (2026) | bus cabling and star-point preparation during construction | HUF 250,000–600,000 |
According to budasmart.hu, 45–55% of the cost is hardware, 10–15% design, 20–25% installation and 10–15% programming and commissioning. Almost half of the price is engineering and installation work, so two quotes can only be compared on the same function list.
What drives the cost of a smart home?
- Number and type of lighting circuits: a switched circuit costs less than a dimmed one; LED strips need their own drivers. See smart home installation.
- Blinds and shading: every motor is an actuator channel plus programming; central and weather-based control adds logic. See smart blinds and shading.
- Heating circuits: room-by-room control needs a valve actuator, an actuator channel and a temperature sensor per zone. See smart thermostat and heating control.
- User interface: push buttons, wall-mounted touch panel, phone visualisation and remote access.
- Integrations: ventilation, heat pump, PV, gate – each needs its own interface and programming.
- Depth of programming: scenes, automations, presence detection; this is the bulk of the engineering work.
- New build or retrofit: in a new house the bus cable goes into the walls cheaply together with the wiring; in a finished house you choose between wireless devices and opening walls.
Wired or wireless: where is the price difference?
| Aspect | Wired (KNX, Loxone Tree, Grenton) | Wireless (Shelly, Zigbee, Z-Wave/FIBARO) |
|---|---|---|
| Initial cost | higher: bus cable, actuators in the distribution board, programming | lower, installed without opening walls |
| When realistic | new build or full renovation | occupied house, smaller budget, add-on |
| Without internet | KNX runs locally; only remote access needs the internet | depends on the vendor; many devices need a cloud or Wi-Fi |
| Maintenance | no batteries in wired devices | battery sensors typically every 1–3 years |
| Who can extend it later | KNX: any KNX professional with ETS, given the project file | depends on the chosen ecosystem |
In detail: KNX or wireless smart home · Loxone or KNX · smart relays, Shelly, Home Assistant.
KNX or Loxone price: why is KNX more expensive?
In the public ranges KNX is the most expensive, Loxone is in the middle and Grenton below it (mete.hu, budasmart.hu). The difference comes mainly from device prices and the system architecture:
- KNX: an open international standard with devices from many manufacturers and a single programming tool (ETS). Given the project file, any KNX professional can take over.
- Loxone: a single-vendor system with its own controller (Miniserver) and software.
- Grenton: also a single-vendor system; cheaper according to the public ranges.
We are an official KNX Partner (partner number 123558) and design and program KNX systems; we are not a Loxone or Grenton partner. The function list and the budget decide, not the brand.
How do you get an exact price from us?
- Survey and consultation: on site or at our office, ideally with everyone who will live in the house; we look at the floor plan and the existing or planned wiring.
- Function list: lighting circuits, blinds, heating zones, user interfaces and integrations room by room.
- System design: choice of system (wired, wireless or mixed), device list, distribution board layout.
- Itemised quote: devices and work itemised, so it can be compared with other quotes.
- Installation, programming, handover: at handover we give you the documentation and the KNX project file; on electrical handover documents see electrical as-built documentation.
That is why we do not quote a fixed price by phone or e-mail: for two houses of the same size the difference can run into millions depending on the function list.
Frequently asked questions
What does a smart home cost in Hungary in 2026?
For a 100–150 m² family house, public 2026 price lists range from about HUF 0.85 million (wireless retrofit of lighting and blinds) to over HUF 7 million (wired KNX in a new house). We give the exact price in an itemised quote after a survey and a system design.
How much does a KNX system cost for a family house?
According to the 2026 indicative table of mete.hu, HUF 6.6–7.2 million incl. VAT for a new 120–150 m² house; daibau.hu gives HUF 8,000–28,000/m² for a mid-range KNX system. The total depends on the number of circuits, blinds, heating zones and user interfaces.
How much does Loxone cost?
According to mete.hu, a wired Loxone system in a new 120–150 m² house costs HUF 4.12–4.5 million incl. VAT (2026). We are not a Loxone partner; as a KNX Partner we recommend KNX, but the function list decides.
What does a smart home retrofit cost?
A wireless retrofit without opening walls (Shelly/Zigbee) for lighting and blinds costs HUF 850–930 thousand according to mete.hu; a whole home with FIBARO HUF 1.87–2.04 million; a Home Assistant hybrid HUF 1.43–1.56 million (incl. VAT, 120–150 m², 2026).
What makes a smart home more expensive?
Dimmed circuits, many blinds and heating zones, a touch panel and visualisation, integrations (ventilation, heat pump, PV) and the depth of programming. According to budasmart.hu, 45–55% of the price is hardware; the rest is design, installation and programming.
Is a wired system worth it?
In a new house or a full renovation usually yes: the bus cable goes in with the wiring, the system works locally without the internet, there are no batteries to change, and with KNX any KNX professional can extend it using the project file. In an occupied house a wireless system is cheaper and needs no wall opening.
What do programming and system design cost?
Public 2026 figures: system design and consulting HUF 180–200 thousand (mete.hu); programming with training and documentation HUF 600 thousand–1.5 million (okosotthonszerelod.hu). With us these are items of the itemised quote.
Why don’t you give a fixed price by phone?
Because every house is different: for two houses of the same size the number of circuits, blinds, heating zones and integrations can make a difference of millions. After a survey and a function list we give an itemised quote.
Let’s talk about your project.
Tell us what you are planning and we will get back to you within a few days.
Get in touch