LOW VOLTAGE · AUDIO AND VIDEO

Home cinema and multiroom audio installation for family homes

A good home cinema and music in several rooms do not start with the speaker but with the cable in the wall: speaker cable to in-ceiling and in-wall speakers, network cable to the players, conduit behind the TV and projector, and power where the amplifier sits. We design and install the cabling, fit the speakers and devices, and set up the multiroom system, such as Sonos.

What we install

  • Home cinema: TV or projector, soundbar or AV receiver, in-ceiling and in-wall speakers (also in the ceiling for surround sound), subwoofer.
  • Multiroom audio: music in several rooms, separately or together, controlled from your phone; with built-in or standalone speakers.
  • Outdoor audio: terrace, garden, pool; with outdoor-rated speakers and cable.
  • Preparation: if the sound system comes later, only the cable and conduit go into the wall now.

We build the system on the existing or planned network; on networking: network cabling: Cat6 or Cat6A, Wi-Fi throughout the house.

Cabling in the wall: what to decide before plastering

WhereWhat we runWhat we watch
In-ceiling and in-wall speakersspeaker cable to the amplifier location, per speaker or per pairthe cross-section depends on cable length and speaker impedance; speaker positions are fixed before the furniture plan
Wall-mounted TVconduit from behind the TV to the media cabinet, plus a socket and network cableHDMI standards change: in a conduit the cable can be replaced later
Projectorsocket and network cable on the ceiling, conduit to the playerthe throw distance is calculated from the screen size before the outlet position is fixed
Amplifier, player, routernetwork cable to every fixed device, a dedicated circuit for the media cabinetventilation: amplifiers get warm, and heat builds up in a closed cabinet
We run speaker and network cables separately from 230 V wiring so the sound does not hum. Done later, the same means chiselling, filling and painting.

Multiroom audio with Sonos: what to watch

In a Sonos multiroom system every room has its own player, and the app plays music room by room or everywhere at once. For built-in speakers the manufacturer’s Sonos Amp is the right amplifier: according to the manufacturer it delivers 125 W per channel into 8 Ω speakers and drives passive (separately amplified) in-ceiling, in-wall or outdoor speakers.

  • One amplifier (or player) per room, with speaker cable running from the room to the amplifier location, so we fix the media cabinet position at the start of the design.
  • Network: players work on Wi-Fi, but where possible we add a network cable; it is more stable and does not load the Wi-Fi.
  • Matching speakers and amplifier: speaker power handling and impedance must suit the amplifier datasheet; the Sonos guide does not allow speakers below 4 Ω.

We install other multiroom or AV-receiver systems in the same way. In a KNX home the sound system can be included in scenes; see KNX smart home.

How it works

  1. Requirements and designWhich rooms need music, where the TV, projector and home cinema go; where the media cabinet sits. This gives the speaker positions and the cable plan.
  2. CablingSpeaker cable, network cable, conduit and sockets, in the wall during construction, before plastering.
  3. InstallationIn-ceiling and in-wall speakers, amplifiers, players, TV bracket, projector.
  4. Setup and handoverMultiroom system, rooms, scenes, tuning; a walkthrough of how to use it and documentation.
Individual quote based on the plans or a site survey. If the sound system comes later, the preparation (cable, conduit, media cabinet position) is still worth doing now.

Frequently asked questions

When should speaker cables be installed?

Before plastering and drylining, together with the other low-voltage cables. Later, in-ceiling speaker cable can only be run in a suspended ceiling or in chased walls.

What speaker cable do in-ceiling speakers need?

The cross-section depends on the cable length and the speaker impedance; longer runs need thicker cable. We specify it per speaker in the design.

Can built-in speakers be used with Sonos?

Yes, with the Sonos Amp. According to the manufacturer it delivers 125 W per channel into 8 Ω speakers and drives passive in-ceiling, in-wall and outdoor speakers.

Wi-Fi or cable for multiroom players?

Cable where possible: it is more stable and does not load the Wi-Fi. Players also work on Wi-Fi, but fixed devices are worth a network cable.

Where do you work?

In Budapest (mainly the Buda districts) and the Buda suburbs. We speak English.

Let’s talk about your project.

Tell us what you are planning and we will get back to you within a few days.

Get in touch

Cookie settings

Choose what you consent to. We remember your choice for 6 months; change it any time via “Cookie settings” in the footer.

Privacy notice