LOW VOLTAGE · INTERCOM

Video intercom installation and wiring

We install video intercoms in family homes and replace apartment-building intercoms, from old analogue systems to modern ones. 2-wire, 4-wire or IP, with indoor monitor, answering and door opening on your phone, linked to access control, CCTV and the KNX smart home. In Buda and its suburbs.

Which intercom: 2-wire, 4-wire or IP?

SystemWhat runs on the cable?Good for
2-wirepower, video, audio and control on a single pair (Hikvision 2-wire: 2-conductor cable, 24 AWG or larger)replacing old systems while keeping the cable: homes and apartment buildings
4-wire (analogue)typically separate conductors for power, video, audio plus a common ground (e.g. VIP Vision INTKIT-A1: 12 V DC, video, audio, ground)simple single-gate homes; pinouts differ by manufacturer
IP intercomnetwork (UTP) cable; the door station can be powered via PoE (e.g. Hikvision DS-KV6113-WPE1(C))new builds, renovations, several gates, smart homes, CCTV on the same network

For a new build or full renovation we recommend an IP intercom with UTP cable to the low-voltage cabinet: it shares the network with the CCTV system and can be extended any time. Where the old cable cannot be replaced (under plaster, in a stairwell), a 2-wire system is the right choice, as the existing pair is enough.

How is an intercom wired?

Wiring depends on the system, and terminal assignments differ by manufacturer and even by model. We connect nothing without the manufacturer’s wiring diagram. The steps in principle:

  1. Cable from the door station to the indoor station (one pair for 2-wire, four conductors for 4-wire, UTP for IP), separated from 230 V cables.
  2. Power supply or distributor in the low-voltage cabinet; in 2-wire systems it powers the bus (Hikvision’s 2-wire kit uses a 24 V DC power and data distributor).
  3. Lock or gate motor on the door station relay or lock output; Hikvision’s 2-wire kit provides a 12 V output for an electric lock.
  4. Network and app: the indoor station connects to the router; the phone app (Hik-Connect for Hikvision) answers calls and opens the door.
  5. Test: call, picture, audio, door release, phone forwarding and calls between indoor stations.
Connecting the power supply to 230 V is electrician’s work. On the low-voltage side we first measure the old system’s cables: an unlabelled cable bundle in an apartment building is the most common source of faults.

Replacing an apartment-building intercom: what does it take?

If the old analogue intercom crackles, some handsets no longer work or residents want video, replacing it does not necessarily mean new cabling. In Hungary the most searched intercom brands are Hikvision, Codefon, Legrand (BTicino) and Urmet; old building systems are often from among these.

  • Keeping the existing cable: 2-wire video systems are designed for replacing old building intercoms; according to Hikvision, existing wiring can be reused, so no new cable has to be run in the stairwell.
  • Step by step: first the entrance panel and the central unit, then each flat replaces its handset with a video monitor at its own pace.
  • Card or phone opening: access control can be added to the stairwell door and garage gate, with card or phone for residents.

In an apartment building the client is usually the property manager. After a survey we provide a technical proposal and an itemised quote that the manager can present to the owners.

How do you adjust intercom volume?

On a modern IP indoor station, in the menu: according to Hikvision’s DS-KH6320 configuration guide, the sound settings cover ringtone, call and microphone volume and prompt sounds, and the same can be done from the remote configuration interface. On old analogue systems, where volume is set depends on the model (handset, door panel or central unit) – the manufacturer’s manual says. If audio is distorted or faint, the cause is often the old cable or a faulty door station rather than the setting; we measure this during the survey.

DoorBird, Hikvision or Dahua intercom?

For intercoms we primarily install DoorBird and Hikvision. DoorBird is an IP video intercom with its own phone app; Hikvision offers 2-wire and IP versions with indoor monitors, and the cameras show in the same app. We also install Dahua, and other brands on request, such as 2N or Akuvox. If the house already has Hikvision or Dahua cameras, it makes sense to stay with the same manufacturer.

Can the intercom be linked to access control, CCTV and KNX?

Yes. Door stations are available with a card reader, so the intercom also works as access control; in larger systems the access controller and the intercom open the same lock. CCTV pictures can appear on the indoor monitor (Hikvision’s 2-wire indoor station can show additional cameras). In a KNX smart home the doorbell signal can be fed into KNX as an input and switch on the entrance lights, and the gate can be opened from KNX. Everything terminates in one low-voltage cabinet.

How much does intercom installation cost?

SystemTypical scopeLabourMaterial (estimate)
Video intercom for a family home1 outdoor station, 1–2 indoor monitors, phone forwardingHUF 50,000–120,000HUF 120,000–600,000
Apartment-building intercom replacementdepends on flats, entrance panels, cable conditionindividual quoteindividual quote

The price depends on the system type (2-wire, 4-wire or IP), the number of indoor stations and the cable route. Private customers pay 0% VAT, as our company is VAT-exempt. For apartment buildings we give an itemised quote after a survey.

How is an intercom installed?

  1. SurveyGate, entrance, indoor station locations, measuring the existing cable; for buildings the number of flats and stairwells.
  2. Proposal and quoteSystem type, devices, lock, integration with access control, CCTV and KNX; an itemised quote.
  3. InstallationDoor and indoor stations, power supply or distributor, lock, new cable where needed.
  4. CommissioningAddressing, calls, picture, audio, door release, phone app, calls between indoor stations.
  5. HandoverA walkthrough, app setup on family members’ or residents’ phones, documentation.

Frequently asked questions

How much does a video intercom for a family home cost?

With 1 outdoor station, 1–2 indoor monitors and phone forwarding, labour is typically HUF 50,000–120,000 and material HUF 120,000–600,000. Private customers pay 0% VAT, as our company is VAT-exempt. Apartment buildings get an individual quote.

What is the difference between 2-wire and 4-wire intercoms?

In a 2-wire system power, video, audio and control share a single pair, so it works on old cable. A 4-wire analogue system typically uses separate conductors for power, video and audio plus a common ground. The exact pinout differs by manufacturer.

Can the old cable stay when replacing a building intercom?

Often yes: 2-wire video systems are designed to reuse old building wiring. During the survey we measure whether the existing cable is suitable.

Can I answer the door on my phone?

Yes. IP and 2-wire video indoor stations connect to the router, and in the manufacturer’s app (Hik-Connect for Hikvision) you answer calls and open the door on your phone.

How do I adjust intercom volume?

On an IP indoor station in the sound settings menu (ringtone, call and microphone volume). On old analogue systems it depends on the model; faint audio is often caused by the old cable or the door station.

Which intercom brands do you install?

Primarily DoorBird and Hikvision, Dahua too, other brands on request (e.g. 2N, Akuvox). We also replace old Codefon, Urmet or Legrand systems.

Does an intercom need power?

Yes: it runs from a power supply or distributor; an IP door station can be powered from a PoE switch. Connecting the power supply to 230 V is electrician’s work, which we also do.

Can the intercom also be access control?

Yes. Many door stations come with a card reader, and the gate opens by card or phone. For several doors we install an access controller that operates the same lock.

Let’s talk about your project.

Tell us what you are planning and we will get back to you within a few days.

Get in touch

Cookie settings

Choose what you consent to. We remember your choice for 6 months; change it any time via “Cookie settings” in the footer.

Privacy notice