LOW VOLTAGE · ACCESS CONTROL

Access control installation for homes and companies

For a gate, a front door, a garage or the many doors of a company: we design, install and commission card, PIN, phone, fingerprint or face recognition access control, with electric locks, door controllers and central user management. For companies we also install the time attendance terminal with its software, and deliver the data to payroll or to Dynamics 365. In Buda and its suburbs.

Which access control: PIN, card, phone, fingerprint or face?

The credential depends on use: how many people come and go, whether you need to know who opened when, and whether the users are employees. One reader often supports several credentials.

CredentialHow it worksGood forWatch out
PIN codenumber code on a keypadgate, garage, temporary codes for couriers or cleanerscodes get passed on; change them regularly
Proximity card (EM, 125 kHz)contactless card or key fobsimple, low-cost accessan EM4100 chip only sends a factory-programmed 64-bit ID, without authentication
MIFARE DESFire card (13.56 MHz)ISO/IEC 14443 card with AES-based authenticationcompanies, many doors, time recordingchoose card and reader together
Phone (app)open from the app, even remotelyfamily homes, guests, gate from the carneeds internet and user management
Fingerprintbiometric readerfamily homes, private usefor employees only lawful by narrow exception (see below)
Face recognitioncamera terminalfamily homes, hands-free entrysame as fingerprint: at work only by exception

At home, comfort decides: fingerprint or phone at the gate, PIN for guests. In a company, user management and the law decide: card or PIN – and no biometrics where working time is recorded too.

Family home or company: what is different?

Family homeOne to three points: garden gate, front door, garage. Reader or keypad, electric lock or strike, phone opening, temporary codes. Often combined with the video intercom and the KNX smart home.
Company, office, plantSeveral doors, barriers or turnstiles, networked controllers, central software: who may enter which door when, logging, time zones, blocking a lost card. Plus a time attendance terminal for working-time records.
Apartment buildingStairwell entrance and garage gate, card or phone for residents; often together with replacing the old intercom.

Standalone reader or networked door controller?

A standalone reader handles one door: the user list is in the device, and it switches the lock directly. Fine for a gate or garage, but each door is programmed separately and the log stays in the device.

A networked door controller handles one or more doors, gets its permissions from central software and reports every event. A lost card is blocked on all doors at once, time zones are possible (e.g. management only at weekends), and you get reports. The controller sits in the low-voltage cabinet on a UPS; readers run on UTP cable, network devices can also be powered via PoE.

Maglock or electric strike: which lock for which door?

We choose the lock by door and use. The key question is what it does during a power cut:

  • Fail safe (unlocked without power): a maglock holds only while powered. According to manufacturer CDVI, electromagnetic locks are generally fail safe as standard.
  • Fail secure (locked without power): an electric strike is usually fail secure; the door stays locked during a power cut and opens with a key. Strikes come in both versions.

That is why a maglock door gets a battery-backed supply for controller and lock, so a power cut does not open the building. On escape routes we agree the lock behaviour (power cut, fire alarm) with the fire safety design. On existing doors we check frame and leaf during the survey: the strike goes into the frame, the maglock between leaf and frame.

Time attendance terminals for companies: installation, setup, software

Recording working time is mandatory in Hungary: under section 134(2) of the Labour Code (Mt.), the start and end of regular and overtime work and of standby must be ascertainable from the records on a daily basis. The law prescribes no device; a terminal makes it simple.

We do the full job: choosing the terminal (outdoor or indoor, card, PIN, mobile), cabling and mounting, commissioning, software setup (work schedules, employees, cards), and handing the data over to payroll. If needed, the terminal is part of the access control: the same card opens the door and records the time.

For working time we recommend card, PIN or phone – not fingerprint or face recognition. According to the President of the Hungarian data protection authority (NAIH), checking working hours is not an interest weighty enough to justify processing employees’ biometric data (NAIH-8700-2/2024). Details: time attendance, working-time records and GDPR.

How does attendance data get to payroll or Dynamics 365?

The terminal stores clock-ins and clock-outs as events. The software turns them into a monthly attendance report that payroll or the accountant receives as an export. Where a company uses Microsoft Dynamics 365 or the Power Platform, the terminal events can go there too: pairing ins and outs, fixing missing punches and approval happen there, and payroll gets the monthly data from it.

We start the integration with a survey: which terminal, which data connection, which payroll software. More on the Dynamics 365 side: Microsoft Dynamics 365 consulting.

Can employees be identified by fingerprint?

Only by narrow exception. Under section 11(1) of the Hungarian Labour Code, an employee’s biometric data may be processed for identification only to prevent unauthorised access that would endanger life, physical integrity or health, or risk serious or mass, irreversible harm to a significant interest protected by law. Paragraph (2) gives examples: classified information of at least “Confidential” level, firearms, ammunition, explosives, toxic or hazardous substances, nuclear material, assets of particularly high value.

The NAIH’s 2019 guidance (NAIH/2019/1074) says that in employment, consent is generally not a valid legal basis, a biometric obligation written into the employment contract is not lawful either, and biometric systems are generally neither indispensable nor the least intrusive way to monitor employees. The employer must check whether a less intrusive, equally effective alternative exists. Employees must be informed in writing in advance about monitoring with technical devices (Mt. section 11/A(1)).

At home it is different. Under Article 2(2)(c) GDPR, the regulation does not apply to processing by a natural person in the course of a purely personal or household activity. A fingerprint opener on your own gate for your own family is therefore fine. For companies we plan card, PIN or phone for access and working time.

Which access control brands do we install?

For access control we mainly install Hikvision and Dahua, for intercoms primarily DoorBird and Hikvision; on request we also install and commission other brands such as 2N, Akuvox or ZKTeco. In Hungary, Hikvision is by far the most searched access control brand; other well-known manufacturers include ZKTeco, Suprema, Paxton, HID and Ubiquiti (UniFi Access). We choose devices for the job: indoor or outdoor reader, card type, central software and the existing systems (CCTV, intercom, KNX).

Can access control be linked to the intercom, CCTV and KNX?

Yes. The same lock opens from the video intercom indoor station or the phone app as from the card (Hikvision, for example, offers call answering and door opening on the phone in its Hik-Connect app). The CCTV system records the moment of entry, and the alarm can be disarmed on entry. In a KNX smart home the gate can be opened from KNX, and entry can trigger a scene (lights, heating).

How much does access control installation cost?

SystemTypical scopeLabourMaterial (estimate)
Access control for a family home2–3 doors/gates, readers, electric locks, controllerHUF 100,000–250,000HUF 200,000–600,000
Company access control, attendance terminal, integrationdepends on doors, controllers, software, data transferindividual quoteindividual quote

The price depends on the credential, the lock type, cable length and whether the cable can go into the wall during construction. Private customers pay 0% VAT, as our company is VAT-exempt. For companies we give an itemised, individual quote after a survey.

How is access control installed?

  1. SurveyDoors, gates, frames and leaves, cable routes, controller location; for companies users, time zones and working-time recording.
  2. Plan and quoteCredentials, readers, locks, controller, software, data protection; an itemised quote.
  3. Cabling and mountingReaders, locks, exit buttons, controller, UPS; attendance terminal.
  4. CommissioningPermissions, cards, codes, time zones, phone app; integration with intercom, CCTV, KNX and payroll.
  5. HandoverEvery door tested, power-cut test, a walkthrough, documentation and passwords.

Frequently asked questions

How much does access control for a family home cost?

A system for 2–3 doors or gates (readers, electric lock, controller) typically costs HUF 100,000–250,000 in labour and HUF 200,000–600,000 in material. Private customers pay 0% VAT, as our company is VAT-exempt. For companies we give an individual quote.

What is a proximity card, and how is MIFARE different?

A proximity card is a contactless access card. A simple 125 kHz EM card (e.g. EM4100 chip) only sends a factory-programmed ID. A 13.56 MHz MIFARE DESFire card follows ISO/IEC 14443 and supports AES-based authentication, which is why we recommend it for companies.

Does access control work during a power cut?

Yes, if controller and lock have a battery-backed supply. Without a battery a maglock opens (fail safe), while a fail-secure strike stays locked and opens with a key. Which one is needed depends on the door and fire safety requirements.

May employees be identified by fingerprint?

As a rule, no. Section 11 of the Hungarian Labour Code only allows processing employees’ biometric data to prevent unauthorised access that risks serious, irreversible harm (e.g. weapons, hazardous substances, classified data). According to the NAIH, checking working time is not such an interest. For companies we recommend card, PIN or phone.

Can I have a fingerprint gate opener at home?

Yes. Under Article 2(2)(c) GDPR, the regulation does not apply to processing in the course of a purely personal or household activity, so a fingerprint opener for your own family is fine.

Can the gate be opened from my phone?

Yes. IP-based access control and intercoms open from an app, even remotely; answering calls and opening the door are in one app. For simple needs without internet, a GSM gate opener is an option: it opens when one of the authorised numbers calls.

Do I need a new door for a maglock?

Usually not. The maglock goes between leaf and frame, the strike into the frame. During the survey we check that frame and leaf are suitable and where the cable will run.

Do you connect attendance data to payroll?

Yes. We install the terminal with its software and hand the monthly data over to payroll; if the company uses Dynamics 365, the events can go there too, with pairing and approval.

Let’s talk about your project.

Tell us what you are planning and we will get back to you within a few days.

Get in touch

Cookie settings

Choose what you consent to. We remember your choice for 6 months; change it any time via “Cookie settings” in the footer.

Privacy notice