Time attendance systems and terminals: card, PIN or fingerprint?
Recording working time is mandatory in Hungary (Labour Code, Mt. section 134), but the law does not say with what device. If a company chooses a terminal, the question is how to identify employees. Fingerprint and face recognition for working time are not lawful according to the Hungarian data protection authority (NAIH): section 11 of the Labour Code allows employees’ biometric data only to prevent serious, irreversible harm. That is why we recommend card, PIN or phone for attendance. A sourced summary of the rules.
In short
- Mandatory? Yes. The employer records the duration of regular and overtime work, standby and leave; the start and end of working time and standby must be ascertainable on a daily basis (Mt. section 134(1)–(2)).
- With what device? The law prescribes none: paper, terminal or software. Monthly confirmation of the work schedule is also enough if changes are recorded daily (Mt. section 134(3)).
- Fingerprint or face? Not recommended for working time: according to the President of the NAIH, checking working hours is not an interest weighty enough to justify biometric processing (NAIH-8700-2/2024).
- What to choose? A card (preferably encrypted, e.g. MIFARE DESFire), PIN or phone clock-in. At home, for private use, a fingerprint reader is fine.
Author: Norbert Madarász
, Managing Director and Partner · Updated: 15 November 2026
Is working-time recording mandatory, and what must be recorded?
Yes. Under section 134(1) of the Hungarian Labour Code (Mt.), the employer records the duration of a) regular and overtime work, b) standby and c) leave. Under paragraph (2), the start and end of regular and overtime work and of standby must be ascertainable from the records on a daily basis.
Paragraph (3) offers a simplification: records of regular and overtime work may also be kept by confirming the written work schedule at the end of the month and recording any changes daily. So the law does not require a terminal, software or paper; it requires that start and end times are known day by day.
Paper timesheet, time clock or terminal: what is the difference?
| Solution | How it works | Good for | Weak point |
|---|---|---|---|
| Paper timesheet | employee signs, employer totals monthly | small teams, fixed schedules | manual totals, later corrections hard to trace |
| Time clock | card or code time stamp at the entrance | workshop, plant, single entrance | a separate system unless linked to payroll |
| Attendance terminal | card, PIN or mobile; events go into software | several sites, shifts, combined with access control | software and data transfer must be set up |
| Mobile clock-in | phone app, with or without location | field staff | location data is a separate privacy question |
An attendance terminal can be part of the access control: the same card opens the door and records the time, and the monthly report is generated automatically. How we install it: access control and attendance terminals.
May working time be recorded by fingerprint or face recognition?
Fingerprints and facial images used to uniquely identify a person are biometric data (Article 4(14) GDPR), a special category whose processing is prohibited as a rule under Article 9(1) GDPR. At work, section 11(1) of the Labour Code applies on top: an employee’s biometric data may be processed for identification only where necessary to prevent unauthorised access that would endanger life, physical integrity or health, or risk serious or mass, irreversible harm to a significant interest protected by law.
In 2024, commenting on a draft for biometric access control in hospitals, the President of the NAIH addressed working time directly: employer checks on working hours are not an interest comparable in weight to those listed in section 11(1)–(2), so they cannot justify processing employees’ biometric data. In his view biometric identification restricts data protection rights disproportionately and without compelling reason; he did not support the amendment in that form (NAIH-8700-2/2024).
Consent does not solve it either. According to the NAIH’s 2019 guidance, consent is generally not a valid legal basis in a relationship of strong subordination, and a biometric obligation in an employment or collective agreement is not lawful. Consent is valid only exceptionally, if it can be refused freely and without consequences and is not a condition of employment. The NAIH concludes that biometric systems are generally neither indispensable nor the least intrusive way to monitor employees (NAIH/2019/1074). In Germany, the Berlin-Brandenburg Regional Labour Court likewise held that a biometric time recording system is as a rule not necessary (LAG Berlin-Brandenburg, 10 Sa 2130/19).
When can biometrics still be considered?
For access control, not for working time, and only for interests of the weight listed in section 11(2): protecting classified information of at least “Confidential” level, storing firearms, ammunition or explosives, toxic or hazardous chemical or biological substances, nuclear material, or protecting assets of particularly high value under the Criminal Code.
- Alternatives: according to the NAIH, the employer must check whether an equally effective but less intrusive solution exists, and if so, choose it.
- Balancing test: under legitimate interest, the employer must prove and document that its interest objectively prevails.
- Extra obligations: for special-category data the NAIH’s 2019 guidance mentions, for example, a mandatory prior data protection impact assessment, appointing a data protection officer and rules ensuring a high level of protection.
- Safeguard: in the EU example quoted by the NAIH (a laboratory working with dangerous viruses), biometric data was stored not centrally but on the employees’ own access cards.
At home it is different: under Article 2(2)(c) GDPR, the regulation does not apply to processing by a natural person in the course of a purely personal or household activity. A fingerprint opener on your own gate for your own family is fine.
Which terminal: card, PIN or mobile?
- Card or key fob: the simplest clock-in. For new systems we recommend an encrypted card (e.g. MIFARE DESFire, ISO/IEC 14443, AES-based authentication), as a simple 125 kHz EM card only sends a factory-programmed ID.
- PIN: works without a card, but codes can be passed on; good as a second factor next to a card.
- Mobile: via app or at the terminal, for field staff; collecting location data needs a separate privacy assessment.
- Outdoor or indoor: next to the entrance you need a weatherproof outdoor terminal; indoors, reception or the workshop entrance works well.
- With access control: if the terminal is part of the access control, one card opens the door and records the time; a lost card is blocked in one place.
Many terminals also support fingerprint and face recognition. For working time we configure them to record by card, PIN or mobile.
What must employees be told about the terminal?
Under section 11/A(1) of the Labour Code, employees may be monitored in relation to their conduct at work, the employer may use technical devices, and must inform employees about this in writing in advance. The content of the privacy notice is set by Article 13 GDPR, which the NAIH’s 2024 letter also refers to.
On retention, the NAIH wrote in the same letter that keeping entry and exit data for 5 years is unjustifiably long; it pointed out that labour claims expire after three years (Mt. section 286(1)) and added that even 3 years would seem excessive. The employer therefore sets the retention period in proportion to its purpose.
Where does the data go: terminal, payroll or Dynamics 365?
The terminal stores events (who, when, at which terminal). The software pairs ins and outs and produces a monthly report that payroll or the accountant receives as an export. Missing or wrong punches are corrected and approved by the manager; the records must track this too, so that start and end times remain known day by day.
Where a company uses Microsoft Dynamics 365 or the Power Platform, terminal events can be transferred there and passed on to payroll. We install and configure the terminal, software and data transfer: access control and attendance terminals. On the Dynamics 365 side: Microsoft Dynamics 365 consulting.
Related: Low-voltage systems · Video intercom installation · CCTV installation
Frequently asked questions
Is working-time recording mandatory in Hungary?
Yes. Under section 134 of the Labour Code the employer records regular and overtime work, standby and leave, and the start and end times must be ascertainable daily. The law prescribes no device.
Is a monthly timesheet enough?
For regular and overtime work, section 134(3) allows confirming the written work schedule at the end of the month if changes are recorded daily. Start and end of standby must still be recorded daily.
May employees clock in by fingerprint?
For working time, not according to the NAIH: checking working hours is not an interest of the weight section 11 of the Labour Code requires for biometric data (NAIH-8700-2/2024). Use card, PIN or phone instead.
Can an employee refuse fingerprint clock-in?
According to the NAIH’s 2019 guidance, a biometric obligation in the employment contract is not lawful, and consent is only valid if it can be refused freely and without disadvantage. If refusal has consequences, the consent is invalid.
Is a face recognition terminal lawful for working time?
A facial image used to uniquely identify a person is biometric data (Article 4(14) GDPR), so the same applies as to fingerprints: according to the NAIH not lawful for working time.
How long may entry and exit data be kept?
We found no statutory period. In 2024 the NAIH considered 5 years unjustifiably long, referred to the 3-year limitation period of section 286(1) of the Labour Code and added that even 3 years would seem excessive. The employer sets the period in proportion to its purpose.
Must employees be informed about the terminal?
Yes. Under section 11/A(1) of the Labour Code, monitoring with technical devices must be announced in writing in advance; the content of the notice follows Article 13 GDPR.
Can I have a fingerprint opener at home?
Yes. Under Article 2(2)(c) GDPR the regulation does not apply to purely personal or household activities, so a fingerprint opener for your own family is fine.
Let’s talk about your project.
Tell us what you are planning and we will get back to you within a few days.
Get in touch