KNOWLEDGE BASE · POWER

Wallbox, Voltie, Tesla, Besen, Rheidon or V2C? Home EV charger prices and comparison

At home, a wallbox – a wall-mounted charger – is the usual solution. In Hungary, most people search for the Wallbox Pulsar Plus, the Hungarian-made Voltie, the Tesla Wall Connector, Besen, Rheidon and the V2C Trydan. Based on manufacturer datasheets, this article shows how they differ, what they cost installed, and what the differences mean for installation.

In short

  • All of them are Type 2 chargers: up to 7.4 kW on one phase, 11 or 22 kW on three, and all have 6 mA DC fault detection, so a Type A RCD upstream is enough.
  • Wallbox Pulsar Plus and Max: compact, app-controlled, solar charging with the Wallbox energy meter; the Max in a tougher housing with a 5-year warranty.
  • Voltie: designed and made in Hungary (Tatabánya), stainless steel housing, 4G and Wi-Fi, load management and solar mode with an external meter.
  • Tesla Wall Connector Gen 3: 7.3 m cable, Tesla app, load management with a separate Tesla meter; charges non-Tesla cars too.
  • Besen BASIC / SMART: the most affordable, no load management.
  • Rheidon WB500: display, RFID; load management with the separate AC500 unit. V2C Trydan: for solar, inverters and smart homes.
  • Installed, as a package, the charger is invoiced at a discounted price instead of the distributor’s list price: from HUF 290,000 (Besen), from HUF 420,000 (Wallbox Pulsar Plus).

Author: Norbert Madarász, Managing Director and Partner · Updated: 13 November 2026

What does a home charger cost installed?

If you order the charger from us together with installation, we do not charge the list price for the charger but apply our reseller discount. The package includes the charger and installation up to a 10 m cable run – cable, circuit breaker, Type A RCD, mounting, commissioning, protection tests and test report.

ChargerPackage: charger + installation (final price)Charger list price (incl. VAT)
Besen BASIC 11 kW, 6 m cablefrom HUF 290,000HUF 209,900
Rheidon WB500 11 kWfrom HUF 340,000HUF 269,900
Wallbox Pulsar Plus 11 kW, 5 m cablefrom HUF 420,000HUF 344,900
Wallbox Pulsar Max 11 kW, 6 m cablefrom HUF 490,000HUF 429,900
V2C Trydan 22 kW, 5 m cablefrom HUF 490,000HUF 429,000
Voltie 22 kW, 5 m cablefrom HUF 570,000HUF 499,900
Tesla Wall Connector Gen 3from HUF 340,000HUF 216,800 (Tesla online shop)

List prices are the gross list prices of the distributor, EVsOLUTION Kft.; package prices reflect November 2026. The charger price may change at the distributor; we give the exact itemised price in writing after a site survey.

Not included in the package: a cable run over 10 m or underground, extending or replacing the distribution board, a capacity increase with the grid operator, a load management meter (Wallbox meter, Rheidon AC500, Voltie meter). Their prices are on our EV charger installation page.
Wallbox Pulsar Max wall charger on a house wall, the owner checking the Wallbox app
Wallbox Pulsar Max outdoors: charging can be started and tracked in the app. · Image: Wallbox

Comparison table

WallboxWallboxTeslaTeslaBesenBesen
ModelPowerBuilt-in DC protectionLoad management, solarConnectivityRating
Wallbox Pulsar Plus7.4 / 11 / 22 kW6 mA DCwith Wallbox energy meter (Power Boost, Eco-Smart)Wi-Fi, Bluetooth, OCPPIP54 / IK08 (socket: IP55 / IK10)
Wallbox Pulsar Max7.4 / 11 / 22 kW6 mA DCwith external Wallbox meterWi-Fi, Bluetooth, OCPPIP55 / IK10
Voltie7.4 kW (1 phase) / 22 kW (3 phases), 6–32 A6 mA DCwith external smart meter; Grid Control without meter4G, Wi-Fi, OCPP 1.6, ModbusIP65 / IK10
Tesla Wall Connector Gen 3up to 22 kWType A + 6 mA DCwith separate Tesla dynamic power meterWi-Fi, Tesla appIP55
Besen BASIC / SMART11 / 22 kW (also 3.7 kW)6 mAnoneBASIC: none; SMART: Wi-Fi, BluetoothIP66
Rheidon WB5007.2 / 11 / 22 kWType A + 6 mA DCwith separate AC500 unitWi-Fi, RFIDIP65
V2C Trydan7.4 / 22 kW (controls from 1.5 kW)6 mA DCControlBox included; inverter, Shelly, Modbus meterWi-Fi, Bluetooth, OCPP 1.6IP54 / IK10

Data from manufacturer datasheets and the Hungarian distributor’s product pages (November 2026). Besen builds many factory configurations; the table shows the BASIC and SMART versions sold in Hungary.

Wallbox Pulsar Plus and Pulsar Max

The two home chargers of the Spanish manufacturer Wallbox have the same capabilities: 7.4 kW on one phase (32 A), 11 kW (16 A) or 22 kW (32 A) on three phases, charging current adjustable from 6 A. Both come with a Type 2 cable or as a socket version, and both have 6 mA DC fault current detection.

  • Pulsar Plus: one of the smallest wall chargers (166×163×82 mm, 1 kg without cable), IP54/IK08; 3-year warranty.
  • Pulsar Max: tougher housing, IP55/IK10, 5, 6 or 7 m cable; in Europe a 5-year warranty for units bought after 1 October 2025.
  • Load management and solar: Power Boost (charging adjusted to household consumption) and Eco-Smart (solar surplus) work with the energy meter supplied by Wallbox, connected via Modbus; Wallbox accepts no other meter.
  • App: Wallbox App, Wi-Fi and Bluetooth; with OCPP it can join a corporate charge management system.
Wallbox Pulsar Plus charger in a garage, charging an electric car
Wallbox Pulsar Plus: one of the smallest wall chargers, with a 5 m Type 2 cable. · Image: Wallbox

Voltie: a charger designed in Hungary

Voltie chargers are designed and made by Voltie Kft. in Tatabánya, Hungary. The Voltie Pro delivers 22 kW on three phases and 7.4 kW on one; the charging current is adjustable from 6 to 32 A, so it can also be set to 11 kW. It comes with a built-in Type 2 cable (5, 7 or 10 m) in a brushed stainless steel housing (204×204×183 mm, 8 kg), IP65/IK10.

  • Protection: built-in 6 mA DC detection, so a Type A RCD upstream is enough.
  • Connectivity: 4G SIM and Wi-Fi, Voltie app; OCPP 1.6 JSON, HTTP API and Modbus RS485 – it can join a smart home or a corporate system. RFID card start.
  • Load management and solar: per-phase dynamic load management and solar (Green and Eco) modes with an external smart meter; according to the manufacturer, the Grid Control function monitors the grid even without a meter.
  • Warranty: 3 years, extendable to 5 with the manufacturer.

Tesla Wall Connector Gen 3

The Tesla Wall Connector Gen 3 is a charger with a fixed 7.3 m Type 2 cable, up to 22 kW (3×32 A), for single- or three-phase connection. According to Tesla’s manual it has built-in Type A + 6 mA DC residual current protection, so no Type B RCD is needed upstream; the enclosure is IP55.

  • Price: HUF 216,800 in the Tesla Hungarian online shop (November 2026); it can be bought there as a guest or as a business. With installation by us from HUF 340,000; if you already have one, installation from HUF 120,000.
  • Load management: charging adapts to the household’s current consumption; this needs the separately sold Tesla dynamic power meter.
  • Charges other cars too: in the Tesla app you can allow all vehicles, Teslas only, or only approved cars.
  • Not mandatory for a Tesla: any 11 kW Type 2 wallbox charges a Tesla just as fast. More: Tesla home charger installation.

Besen: a simple, affordable charger

The Chinese Besen BS20 family is sold in Hungary in two main versions, with a fixed 6 m Type 2 cable in an IP66 housing.

  • Besen BASIC: no app, no network; the current is set on the unit. Fine if you just need to charge, without smart features.
  • Besen SMART: Wi-Fi and Bluetooth, Besen app (scheduling, current limit); no load management, solar mode or OCPP.
  • Protection: 6 mA residual current protection according to the distributor; no MID-certified meter, 24-month warranty.
If the house has little connection capacity, a charger without load management has to be limited to a fixed current, or a capacity increase is needed: capacity increase.
Besen BS20 wall charger with fixed Type 2 charging cable
Besen BS20: fixed 6 m cable, IP66 housing. · Image: Besen

Rheidon WB500: display and separate load balancer

Rheidon is the brand of Rheidon Tech, Shenzhen. The WB500 comes in 7.2, 11 and 22 kW versions with a fixed 6 m Type 2 cable, a 7-inch display, RFID card start and the Wi-Fi Rheidon+ app; IP65, 2-year warranty.

  • Protection: Type A residual current monitoring and 6 mA DC detection built in; according to the manual, a Type A RCD per local rules must be installed upstream.
  • Load balancing and solar: the separately available AC500 unit, mounted in the board, controls the charger by radio and can also charge from solar surplus.
  • Supply connection: by default it comes with a 1.5 m supply cable and a CEE plug; this needs a CEE socket, or a fixed connection.

V2C Trydan: for solar and smart homes

V2C makes the Trydan in Spain: 1.5–7.4 kW on one phase and 4.5–22 kW on three, finely controlled. Available with a Type 2 cable (5 or 10 m) or a socket, with 6 mA DC detection, IP54/IK10; the manufacturer gives a 3-year warranty.

  • Dynamic control: the included V2C ControlBox and current clamp measure household consumption; alternatively a direct inverter connection (Huawei, Fronius, SolarEdge, Victron and others), a Shelly meter or a Modbus meter.
  • Solar charging: with the same devices; for solar systems with a battery the manufacturer specifies a solution other than the ControlBox.
  • Integration: OCPP 1.6, REST API, Home Assistant, Alexa, Google Home – it fits well into a smart home. The Trydan Pro adds Ethernet, 4G and RFID.

What matters at installation?

  1. Dedicated circuit: the charger gets its own circuit breaker and a sized cable; the cross-section depends on power and cable length.
  2. Residual current protection: under HD 60364-7-722, every charging point needs at least a Type A RCD, and DC fault currents must be handled – with 6 mA DC detection in the charger a Type A RCD is enough, without it a Type B is needed. More on RCD types: types of RCDs.
  3. Connection capacity: an 11 kW charger needs 3×16 A of spare capacity, a 22 kW one 3×32 A; if it is not there, load management or a capacity increase.
  4. Load management meter: the meter (Wallbox meter, Voltie meter, V2C ControlBox, Rheidon AC500) goes into the board or next to the meter cabinet, together with its communication cable.
  5. Handover: protection tests and a test report.

Which setting each car needs (1 or 3 phases, 16 or 32 A) is covered in detail on our EV charger installation page.

Electrician mounting a Wallbox Pulsar Max charger on its wall bracket
Mounting the charger is the small part; what matters is behind it: a dedicated circuit, a sized cable, an RCD. · Image: Wallbox

Which one should I choose?

  • Just charging, on a budget: Besen BASIC or SMART.
  • Compact, reliable, app-controlled, solar later: Wallbox Pulsar Plus; outdoors, with a tougher housing and longer warranty, the Pulsar Max.
  • Made in Hungary, steel housing, 4G, solar mode: Voltie.
  • A Tesla at home, Tesla app: Tesla Wall Connector.
  • Display, RFID, simple load balancer: Rheidon WB500 with the AC500.
  • Solar, inverter, smart home (KNX, Home Assistant): V2C Trydan.

For Wallbox, Voltie, Besen, Rheidon and V2C chargers we are a reseller partner of EVsOLUTION Kft., so we source them with manufacturer warranty and short lead times, at a discounted price when installed by us. We also install chargers bought elsewhere.

Frequently asked questions

How much does a home EV charger cost with installation?

With us, the charger plus installation up to a 10 m cable run costs from HUF 290,000 (Besen BASIC 11 kW), from HUF 420,000 (Wallbox Pulsar Plus 11 kW) and from HUF 570,000 (Voltie 22 kW), final prices as of November 2026. Installed by us, the charger is not charged at list price. The exact price follows a site survey.

Should I buy an 11 kW or a 22 kW wallbox?

Most EVs charge on AC at 11 kW at most, so an 11 kW (3×16 A) charger is the sensible choice. A 22 kW one is only faster if the car’s on-board charger is 22 kW and the house can supply 3×32 A.

Which is better: Wallbox Pulsar Plus or Pulsar Max?

They have the same capabilities (7.4–22 kW, 6 mA DC protection, Wi-Fi, Bluetooth, OCPP). The Pulsar Max has a tougher housing (IP55/IK10) and a 5-year warranty in Europe; the Pulsar Plus is smaller, with a 3-year warranty.

What kind of charger is the Voltie?

A wall charger designed and made in Hungary (Voltie Kft., Tatabánya): up to 22 kW, adjustable from 6 to 32 A, with built-in 6 mA DC protection, in a stainless steel housing (IP65/IK10), with 4G and Wi-Fi. Load management and solar charging with an external smart meter; 3-year warranty, extendable to 5.

How much does a Tesla wall charger cost installed?

The Tesla Wall Connector Gen 3 costs HUF 216,800 in the Tesla Hungarian online shop (November 2026), where it can be bought as a guest or as a business. With us, charger plus installation up to a 10 m cable run costs from HUF 340,000; if you already have the charger, installation from HUF 120,000. A Tesla charges just as fast from any 11 kW Type 2 wallbox.

Do I need an RCD in front of a wallbox?

Yes. Under HD 60364-7-722 at least a Type A RCD is required; if the charger has no 6 mA DC fault detection, a Type B. Wallbox, Voltie, Tesla, Besen, Rheidon and V2C chargers have DC detection, so Type A is enough.

Can a Besen charge from solar?

The Besen BASIC and SMART sold in Hungary cannot: they have no load management or solar mode. For that, use a Wallbox (with energy meter), a Voltie (with smart meter), a Rheidon (with AC500) or a V2C Trydan.

Do you install a wallbox bought elsewhere?

Yes. We install any standard Type 2 charger. Wallbox, Voltie, Besen, Rheidon and V2C chargers we also source from our reseller partner, EVsOLUTION Kft., at a discounted price when installed by us.

Let’s talk about your project.

Tell us what you are planning and we will get back to you within a few days.

Get in touch

Cookie settings

Choose what you consent to. We remember your choice for 6 months; change it any time via “Cookie settings” in the footer.

Privacy notice