KNOWLEDGE BASE · LIGHTING

Choosing DALI drivers and controllers: Lunatone, TCI, Helvar, Tridonic, Casambi

A DALI system has three parts: the driver that powers the luminaire (DT6 for single-colour, DT8 for tunable white or colour LEDs), the controller (a standalone DALI controller, a KNX–DALI gateway, or wireless Casambi), and the inputs (push buttons, presence and light sensors). The first rule is that every device is DALI-2 certified and listed in the DALI Alliance database; the second is that driver, controller and gateway all support the same device type (e.g. DT8 Tc). We mainly work with Lunatone, TCI and Helvar equipment, which we install and also supply; the comparison below is based on the manufacturers’ datasheets.

In short

  • One DALI line: up to 64 drivers, 16 groups, 16 scenes per driver; with DALI-2 another 64 input devices; total bus supply at most 250 mA.
  • DALI-2 and D4i: DALI-2 certification can be checked in the DALI Alliance database; D4i extends it for luminaire-mounted control (sensors, data).
  • Driver: DT6 for single-colour LED, DT8 for tunable white or colour, DT1 for emergency; output (current or voltage) to suit the LED.
  • Controller: a KNX–DALI gateway in a KNX house (MDT, Gira, ABB, Lunatone), a standalone DALI controller without KNX, Casambi in a finished house.
  • Our practice: mainly Lunatone, TCI and Helvar – we install and supply these.

Author: Norbert Madarász, Managing Director and Partner · Updated: 10 November 2026

DALI-2, D4i, DT6 and DT8: what the labels mean

The DALI standard (IEC 62386) has parts; datasheets refer to these parts and device types (DT). What DALI is and when it pays off: DALI lighting control at home.

How one DALI line is builtKNX bus(or a standalone DALI controller)KNX–DALI gatewayDALI power supplymax. 250 mADT6LED driverDT8 Tctunable whiteDT1emergencyD4iin the luminaireDALI line: 2 wires, approx. 16 V; max. 300 m on 1.5 mm²DALI-2 inputs:push button · presence · light64 gear addresses · 16 groups · 16 scenes · 64 control devices
One DALI line takes up to 64 control gear and, with DALI-2, another 64 control devices. Total bus supply current is at most 250 mA (DALI Alliance).
LabelMeaningWhen you need it
DALI-2certification since 2017; certified products are listed in the DALI Alliance databasealways: it is how devices from different makers work together
DT6 (Part 207)LED driver, dimmingsingle-colour LED, spots, strips
DT8 (Part 209)colour control: Tc (tunable white), RGBWAF, xytunable white, colour lighting
DT1 (Part 202)self-contained emergency lightingemergency luminaires on the DALI line
Parts 301 / 303 / 304push button, occupancy and light sensors (DALI-2 input devices)buttons and sensors directly on the DALI line
D4i (DiiA Parts 250–253)intra-luminaire DALI: integrated bus power, luminaire, energy and diagnostics data; 24 V AUX supply (Part 150) optionalsensor on the luminaire, energy data, maintenance

A D4i driver powers the bus itself. If several such luminaires go into a larger system, their built-in supplies must be disabled as the DALI Alliance guide describes, otherwise the 250 mA limit can be exceeded.

What to check when choosing a DALI driver

  1. DALI-2 certification: the driver must be listed in the DALI Alliance product database. If it is not, it is not DALI-2 certified.
  2. Device type: DT8 Tc for tunable white, and the controller must support DT8 too; a DT6 driver only dims.
  3. Output: constant current (CC) for spots and LED modules, constant voltage (CV, 24 V) for LED strips; with power headroom, per the LED module datasheet.
  4. Low-end dimming and flicker: the datasheet should state the minimum level and flicker-free operation at deep dimming.
  5. Push-dim: many drivers can also be dimmed from a mains push button without a DALI controller – enough for a simple room.
  6. Programming: output current set via NFC or software; we document addresses and groups.

Manufacturers by datasheet: Lunatone, TCI, Helvar, Tridonic, Casambi

ManufacturerWhat they offer (datasheet, manufacturer site)Good for
Lunatone (Vienna, Austria)DALI-2 power supplies, push-button couplers, sensors, DALI USB, wireless wDALI-2, DALI-2 IoT gateway; KNX-DALI Gateway (89453899: DALI-2, multi-master, up to 63 DALI devices, DT8 tunable white, RGB/RGBW, XY); KNX 4 DALI (4 lines, broadcast); DALI Cockpit software free with a Lunatone interface (Windows)system components, KNX link, commissioning
TCI (Saronno, Italy)LED drivers with DALI-2 (also DALI-1) control and mains push-dim (e.g. DC MAXI JOLLY HV DALI, DC JOLLY DALI); two-channel tunable white driver (MAXI JOLLY SLIM NFC DALI TW); NFC programmerdrivers for spots, luminaires and tunable white
Helvar (Finland)Imagine lighting control: 905–950 application controllers (the 950 is DALI-2 multi-master with 4 subnets), Designer configuration software; ActiveAhead wireless self-learning system (Bluetooth Low Energy); LED drivers made since May 2024 by the separate Helvar Componentslarger standalone DALI systems without KNX, offices, public spaces
Tridonic (Dornbirn, Austria)D4i drivers (premium series: DALI-2, Parts 250–253, NFC), excite series; DALI PS2 power supply (240 mA), DALI XC push-button coupler; basicDIM Wireless (Casambi Ready, up to 250 nodes, 4remote BT app); masterCONFIGURATOR softwareD4i luminaires, drivers, wireless add-ons
Casambi (Espoo, Finland)Casambi Mesh based on Bluetooth Low Energy, free app; “Casambi Ready” products from other makers; Evolution network up to 250 devices; DALI: CBU-DCS (also as a gateway), Salvador (up to 64 DALI drivers, no DALI buttons or sensors)finished, lived-in homes, furniture and strip lighting where there is no bus cable

In practice we mainly work with Lunatone, TCI and Helvar equipment, because we have good experience with its quality; we install and also supply these. Tridonic and Casambi products we install according to the datasheets above, as the job requires. Luminaire makers often ship a particular brand of driver – then we choose the controls to match.

KNX–DALI gateways compared: MDT, Gira, ABB, Lunatone

In a KNX house a KNX–DALI gateway connects the DALI line to KNX; KNX typically sends colour temperature in kelvin with datapoint type DPT 7.600. According to the datasheets:

Gateway (order no.)DALI outputs, devices / groupsDALI-2, colour, emergencyWatch out for
MDT DALI Control 64 (SCN-DA641.04; 2 outputs: SCN-DA642.04)1 or 2; 64 / 16 per outputDALI-2 single-master; DT8 in groups; DT1simple, group-based tunable white
MDT DALI Control IP64 (SCN-DALI64.03)1; 64 / 16DALI-2 single-master; DT8 in groups; DT1 and central batteryEthernet and web interface
MDT DALI Control PRO64 (SCN-DA641P)1; 64 / 16DALI-2 multi-master; DT8 per device and group; 8 DALI-2 sensors; KNX Data SecureDALI-2 sensors on the line
Gira DALI gateway Colour (2111 00; 2 outputs: 2112 00)1 or 2; 64 / 32DALI-2, DALI-2 sensors; DT8 TW, RGB, RGBW, HSVbuilt-in DALI supply
ABB DALI Gateway Premium (DG/S 1.64.5.1; DG/S 2.64.5.1)1 or 2; 64 / 16DALI-2 single-master; DT8 Tc only (tunable white); DT1built-in supply, max. 250 mA; no RGBW colour
Lunatone KNX-DALI Gateway (89453899)1; up to 63 devicesDALI-2 multi-master; DT8 TW, RGB/RGBW, HSV, XYno built-in supply, separate DALI supply needed

At ABB the “Basic” version (DG/S 1.64.1.1, 2.64.1.1) is a different device from the “Premium”; Gira’s older DALI Gateway Plus (2180 00) is not the same as the Colour version. So we always check the exact order number when ordering.

Which solution when? Typical mistakes

SituationOur advice
New KNX house, tunable whiteKNX–DALI gateway with DT8, DT8 Tc drivers; if DALI-2 sensors go on the line, a multi-master gateway
House without KNX, many lights, scenesstandalone DALI-2 controller (e.g. Helvar or Lunatone), DALI-2 push-button couplers, sensors
Lived-in house, no bus cableCasambi Ready drivers or a Casambi–DALI gateway
One or two rooms, dimming onlyDALI driver with mains push-dim, or an LED-compatible dimmer (LED dimmer switches)
  • DT6 driver for a tunable white luminaire: only brightness can be set, not colour temperature.
  • Too many bus supplies: all supplies on a line together may deliver at most 250 mA; built-in supplies of D4i luminaires must be disabled.
  • 65th device on a line: max. 64 driver addresses per line; more lights need a second line or a two-output gateway.
  • Single-master gateway with DALI-2 sensors: DALI-2 input devices on the line need a multi-master controller.
  • Cable: with a 1.5 mm² pair max. 300 m between the two farthest devices; we pull the DALI pair before the drywall (human centric lighting, hidden LED lighting).
  • Documentation: list of addresses, groups, scenes and the project file at handover; without it any later extension starts with readdressing.
We design the DALI system, select and supply drivers and controllers, install, address and program it. No price list: we quote from the design or after a site visit.

Related: LED lighting and lighting control · KNX smart home

Frequently asked questions

What is the difference between DALI and DALI-2?

DALI-2 is the certification based on the newer edition of the standard (since 2017): it also standardises controllers and input devices (buttons, sensors), and certified products are listed in the DALI Alliance database.

What is D4i?

An extension of DALI-2 for luminaire-mounted control: the driver powers the bus and stores luminaire, energy and diagnostics data (DiiA Parts 250–253).

Which DALI driver for tunable white LEDs?

A DT8 (Tc) driver, and a controller or KNX–DALI gateway that supports DT8. A DT6 driver only dims.

Which KNX–DALI gateway should I choose?

It depends on whether you need per-device colour control, emergency, DALI-2 sensors on the line, one or two outputs. MDT, Gira, ABB and Lunatone gateways differ here; the table shows them by datasheet.

How many lights fit on one DALI line?

Max. 64 driver addresses and 16 groups; with DALI-2 another 64 input devices. The Lunatone KNX-DALI Gateway handles 63 devices.

Which brands do you work with?

Mainly Lunatone, TCI and Helvar equipment, which we install and also supply. Other makers (e.g. Tridonic, Casambi) we install according to their datasheets, as the job requires.

Let’s talk about your project.

Tell us what you are planning and we will get back to you within a few days.

Get in touch

Cookie settings

Choose what you consent to. We remember your choice for 6 months; change it any time via “Cookie settings” in the footer.

Privacy notice