Industrial hall lighting and LED retrofit, from design to control
Upgrading the lighting of production halls, warehouses, workshops and logistics areas: we survey the existing system, calculate the new lighting with our partner (DIALux) to EN 12464-1, and install the LED luminaires together with their control — presence and daylight-dependent, DALI-based, so light is on where and when people work.
What does a hall lighting upgrade include?
How much light does a hall need?
Lighting of indoor workplaces is governed by EN 12464-1: for each activity it sets the maintained average illuminance (Ēm), uniformity (U₀), colour rendering (Ra) and glare limit (UGR). Reference values:
| Area, activity | Ēm (lx) | Note |
|---|---|---|
| Storage aisles and passages | 100 | UGR ≤ 25, Ra ≥ 60 (per DIAL’s summary) |
| Warehouses with uniform or bulky items, search or reading tasks | 300 | UGR ≤ 25, Ra ≥ 60 (per DIAL’s summary) |
| Rough work | 200–300 | the row for the activity decides |
| Medium work | from 500 | the row for the activity decides |
| Very fine work | from 1000 | usually with local task lighting |
Ēm is a maintained value: it must still be met after the luminaires have aged and got dirty, so the initial design illuminance is higher, divided by the maintenance factor (e.g. 300 lx ÷ 0.8 = 375 lx). The exact requirement is always the table row for the activity; the survey records it area by area.
Why does LED hall lighting need control?
Swapping to LED reduces power; control reduces operating time. Many hall areas are used only intermittently (rack aisles, loading bays, side rooms), and roof lights or side walls let in significant daylight.
- Presence detection: a rack aisle gets full light when a forklift or person is in it; when empty it dims to a base level or switches off.
- Daylight control: a light sensor measures illuminance and the luminaires add only what is missing (constant light).
- Schedules and shifts: lighting follows the shifts; at weekends and on holidays only the necessary areas are lit.
- Groups and monitoring: with DALI the luminaires are addressable, groups can be rearranged without rewiring and failed luminaires reported; the system can also be connected to BACS building automation.
How do we calculate payback?
We calculate payback from the survey data with your own operating hours and energy price; we do not promise a generic saving percentage. The method:
- Current consumption: number of luminaires × system power (including ballast) × annual operating hours = kWh/year.
- New consumption without control: the number of LED luminaires in the calculated design × power × the same operating hours.
- Effect of control: operating time or light level reduced by presence and daylight, area by area; where nothing is measured, with a cautious estimate shown on a separate line.
- Annual saving: the kWh difference × your energy price, plus avoided lamp and ballast replacements and work at height.
- Simple payback: investment ÷ annual saving. On request we also compare total cost over the luminaires’ lifetime.
What do we watch during installation?
How does a hall lighting upgrade work?
- Survey site walk, existing luminaires and circuits, operating hours and energy price.
- Calculated design a DIALux design with our partner for the requirements of each area, with luminaire and control proposal.
- Quote and payback itemised quote and payback calculated with the method above from your data.
- Installation during operation, scheduled; mounting, connection, setting up DALI groups and sensors.
- Handover illuminance measurement, documentation, operator training.
Related: Lighting design · DALI lighting control · Building automation (BACS) · Energy metering with sub-meters · Emergency lighting rules
Frequently asked questions
How many lux does a hall need?
It depends on the activity: under EN 12464-1, storage aisles typically need 100 lx, warehouse work areas 300 lx, rough work 200–300 lx, medium work from 500 lx and very fine work from 1000 lx. The exact value is the table row for the activity, and it is a maintained value that must still be met after the luminaires have aged.
How much does an LED hall lighting retrofit cost?
It depends on the number of luminaires, ceiling height, the level of control and the condition of the existing installation. After a survey and a calculated design we quote item by item, and calculate payback with your operating hours and energy price.
How do you calculate payback?
The annual saving comes from the difference in yearly consumption between old and new systems (number × system power × operating hours), the effect of control and avoided maintenance; simple payback is the investment divided by the annual saving.
Can the retrofit be done during operation?
Yes, we schedule the work by area and shift, and agree work with lifts and closing of routes with the operator in advance.
Let’s talk about your project.
Tell us what you are planning and we will get back to you within a few days.
Get in touch