KNOWLEDGE BASE · LIGHTING

Kitchen and living room lighting in layers, and the pendant over the dining table

A good kitchen and living room is not lit by a single ceiling light but by layers: even general lighting, task lighting over the worktop and hob, accent lighting on shelves and walls, and the pendant over the dining table. Each layer is switched or dimmed separately. According to manufacturer guidance, the bottom of the pendant hangs about 55–70 cm above the table – which means the ceiling outlet has to be placed to suit the table before the drywall goes up.

In short

  • Four layers: general, task, accent and dining light, on separate circuits, switched or dimmed separately.
  • Kitchen: the worktop should not be lit by a ceiling light behind you (you stand in your own shadow) but from under the wall cabinets.
  • Dining: bottom of the pendant about 55–70 cm above the table, diameter about a third to half of the table width (Louis Poulsen).
  • Living room: several sources at different heights, a switched socket for the floor lamp, hidden LED on walls and ceiling.
  • Early: outlets, switched sockets and LED driver locations before drywall and kitchen units.

Author: Norbert Madarász, Managing Director and Partner · Updated: 10 November 2026

Layers of light: general, task, accent

LayerPurposeTypical solution
Generaleven light for moving around and cleaningrecessed spots, ceiling light, hidden LED at the ceiling edge
Taskshadow-free light on the worktop, hob and sinkLED strip or profile under the wall cabinets, spots above the front edge of the worktop, cooker hood light
Accentdepth, shelves and wallswall washers, cabinet and shelf lighting, plinth light, floor lamp
Dininglight on the table without glarependant or row of pendants over the table, dimmed
Layers of light: kitchen, dining, livinggeneral lightingworktoptask light over the worktopdining table55–70 cmpendant over the tableaccent, ambienceoutlet position fixed before drywall
General, task and accent lighting on separate circuits, switched or dimmed separately. The bottom of the pendant about 55–70 cm above the table (Louis Poulsen, Philips Hue guidance).

Layers only work if they can be switched separately: the same kitchen needs strong task light for cooking and only the dining pendant and a little accent light at dinner. That means separating the circuits in the design and deciding where to dim or use scenes (LED dimmer switches, DALI lighting control).

Kitchen lighting: worktop, island, hob

Worktop lighting (an LED strip or profile under the wall cabinets) is also covered on our LED lighting page; here is the whole kitchen:

  • Shadow: a light in the middle of the ceiling shines from behind you at the worktop, so you work in your own shadow. We light the worktop from under the wall cabinets or with spots above its front edge.
  • Wall without wall cabinets: a wall light, an under-shelf profile, or a row of ceiling spots aimed at the worktop.
  • Kitchen island: pendants over the island with outlets aligned to it; the island’s socket cable in the floor, before the screed.
  • Colour temperature and rendering: 3000–4000 K in the kitchen, Ra ≥ 90 so food looks natural; the same white from every light (CRI, R9 and TM-30).
  • Kitchen plan: wall cabinets, island and hood positions come from the kitchen plan – we align the cable outlets to it and leave accessible space for the driver in a cabinet.

Pendant over the dining table: height, size, outlet

QuestionRecommendationSource
How high?bottom edge about 55–62 cm above the table for smaller pendants, about 60–70 cm for larger onesLouis Poulsen
Another makerabout 58–78 cm above the tablePhilips Hue
How big?diameter about 1/3–1/2 of the table widthLouis Poulsen
Several pendantsabout 80 cm apart, in a row over a long tableLouis Poulsen

The key decision is the outlet position: the pendant belongs over the middle of the table, not the middle of the room. So the table position has to be decided before drywall, painting or ceiling finishes. If the table may move later, there are two options: two outlets (one with a blank cover), or an offset outlet with the cable led to a ceiling hook above the table. A long table gets a linear pendant or two or three pendants – with the outlet split accordingly.

The pendant should be dimmable and glare-free: seated, you should not look into the light source. Fixing and wiring: connecting a light fitting.

Living room lighting: several sources, several heights

  • Not just one ceiling light: a single light in the middle of the ceiling gives even but flat light. Several sources at different heights (ceiling, wall, table, floor) give depth.
  • Switched socket: the floor and table lamp sockets are switched from the wall switch or the controls, so the evening light comes on from the door.
  • Indirect light: hidden LED at the ceiling edge, on the wall or behind shelves; cable and driver location decided before drywall (hidden LED strip lighting).
  • TV wall: soft light behind the screen reduces contrast; no reflective spot in front of the screen.
  • Pictures, bookshelves: wall washer or adjustable spot with good colour rendering.
  • Colour temperature: 2700–3000 K in the living room; to change it with the time of day, see human centric lighting.

What to decide before drywall and kitchen units

  1. Furniture plan and table position: kitchen, island, dining table, sofa, TV – the outlets follow from these.
  2. Layers and circuits: which layer on which switch, what is dimmed, whether scenes are needed.
  3. Outlets: pendant positions (over the table centre), wall light heights, switched sockets.
  4. LED and drivers: strips, profiles, accessible driver locations; cable behind the cabinets for the under-cabinet light.
  5. Control: simple switches and dimmers, or DALI, KNX, Casambi – the bus cable goes into the wall now too.

On request we provide a calculated lighting design (DIALux) through our partner, showing illuminance and luminaire positions in advance. We do the design, cabling, connection and control setup ourselves.

No price list: we quote after a site visit or from the kitchen plan or electrical design.

Frequently asked questions

How high should a pendant hang over the dining table?

Per manufacturer guidance, its bottom about 55–70 cm above the table (Louis Poulsen: 55–62 cm for smaller, 60–70 cm for larger pendants; Philips Hue: 58–78 cm). We set the final height on site.

How big should the dining pendant be?

About a third to half of the table width in diameter; several pendants about 80 cm apart (Louis Poulsen).

What if the ceiling outlet is not above the table?

A new outlet, or a lamp cable led to a ceiling hook. In new builds and renovations we place the outlet to suit the table, before drywall.

How should the kitchen worktop be lit?

With an LED strip or profile under the wall cabinets, or with spots above the front edge, so you do not work in your own shadow.

Which colour temperature for kitchen and living room?

3000–4000 K in the kitchen, 2700–3000 K in the living room, Ra ≥ 90, and the same white within a room.

Does a living room need a lighting design?

For a simple room, thinking through the layers and outlets is enough. For a large open space a calculated design (DIALux) is worthwhile; we provide it through our partner.

Let’s talk about your project.

Tell us what you are planning and we will get back to you within a few days.

Get in touch

Cookie settings

Choose what you consent to. We remember your choice for 6 months; change it any time via “Cookie settings” in the footer.

Privacy notice